Non-conforming building products
Learn how to avoid unsafe or non-compliant building products. Understand your responsibilities, meet NCC standards, and protect safety on your building project.
What are non-conforming and non-complying building products?
In simple terms, non-conforming refers to 'bad products', while non-compliant refers to products that are 'used badly'.
NSW is working with the Australian Government and other states and territories to reduce the risks these products pose to buildings and safety.
To find guidance and tools to support better building, go to the Australian Building Codes Board (ABCB) to find out more about this and other initiatives to support better building, including access to the Guide to Australian building product conformity.
Non-conforming
Non-conforming building products and materials:
- claim to be something they are not
- do not meet required standards for their intended use, or
- are marketed or supplied with the intent to deceive those who use them.
A building product that is labelled or described as being 'non-combustible' but which is in fact combustible' is a non-conforming building product.
Non-complying
Non-complying building products and materials are those that are used in situations where they do not comply with the requirements of the National Construction Code (NCC), other laws and Australian Standards.
That is, a building product that is combustible, and described as such, but is used in a situation where a non-combustible product is required under the NCC, is not fit for purpose and is a non-complying product.
Responsible parties
Everyone in the supply chain has a responsibility to be involved and make sure the right products and materials are used in the right way.
Your place in the supply chain can also mean you have specific obligations or duties to check and assure that the right products and materials are used, and are used correctly.
Depending on your place in the supply chain you can face specific risks and liabilities if products and materials are non-complying or non-conforming.
Manufacturers need to be aware of the requirements of compliance and should be able to demonstrate that their goods comply with the NCC, standards and local laws. This can involve product and material testing, assurance and certification.
Manufacturer statements should clearly specify how a product should or should not be used. They should also be able to supply the necessary compliance and conformance information, including any limitations, for each product and material.
Importers, wholesalers, distributors and retailers must make sure that the products or materials being supplied do not breach trade or consumer laws, or industry-specific requirements for safety or performance.
They should also be able to supply the conformance information, including any limitations for each product and material.
Some products or materials (such as consumer gas and electrical products) have specific requirements to demonstrate safety and suitability before they can be sold, and may require independent testing and certification before being supplied.
Architects, designers, engineers and other specialists involved in the planning, design and construction of buildings must ensure that any products, materials or systems specified or approved for use in their designs are approved, ‘fit for purpose’, and meet the necessary performance requirements.
Approvers and certifiers of development and construction have responsibilities for ensuring that plans and specifications and critical aspects of construction comply with Codes, standards and laws.
They can also have a role in inspecting building and construction and need to be aware of the signs and symptoms of the bad products being used, or products and materials being used badly. Evidence of the suitability of a product or material should be sought where necessary.
Developers, builders and other specialist tradespersons install and work with products and materials.
They are not the only people responsible for making sure that conforming and complying products and materials are used, but much of the risk and responsibility falls to them because they are the ones that ultimately do the building work.
They are also the ones most likely to rectify or remedy the problems. Therefore before a product or material is used, they should be satisfied with the materials.
Note: If you are a tradesperson, talk to your supplier about the suitability of a product for your use. Your certifying authority may also be of some assistance in helping to determine the suitability of a product.
Home owners and consumers also have an important role to play. As the ones that will live, work and play in the finished building, they need to ensure that they engage professionals who can complete the job properly.
Consumers and customers also have a responsibility to make sure that achieving a cost-effective result does not lead to using sub-standard products or unsuitable products.
Consumers and customers should ask questions of the builders and trades they engage about the suitability of the products and materials.
Note: If you are unsure about a building product, talk to your builder or certifying authority.
How to ensure your building products conform and comply
There are some simple checks you can do to protect against non-conforming and non-complying building products in your project:
- Be aware of which products are most important from a compliance perspective. For example, a door handle on a kitchen cupboard is not as critical as a fire safety system or an electrical product.
- Check that the product or material being used is what is nominated in the approved plans and specifications, and that appropriate evidence of conformity and compliance is provided.
- Attempt to obtain suitable evidence from the supplier, and consider either undertaking an inspection or testing if the evidence is not available.
- Where the required compliance and conformance cannot be demonstrated, the product should not be used.
Requirements of the NCC
The National Construction Code (NCC) is a uniform set of technical provisions for the design, construction and performance of building, including building products (excluding electrical products) throughout Australia.
It includes:
- Volumes One and Two: Building Code of Australia (BCA)
- Volume One is for class 2-9 buildings
- Volume Two is for class 1 and 10 buildings
- Volume Three: Plumbing Code of Australia (PCA).
Volume Three includes plumbing products that are listed on the WaterMark Schedule of Products and authorised in accordance with the WaterMark Certification Scheme or Listed on the WaterMark Schedule of Excluded products.
The general provisions regarding the Acceptance of Design and Construction are found in Part A2 of Volumes One and Three and Part 1.2 of Volume Two of the NCC. You can download these sections of the NCC from the Australian Building Codes Board.
Evidence
There are six different types of evidence that can be used to verify that a product conforms and or complies with Volume One and Two of the NCC:
- CodeMark Certificate of Conformity
- Certificate of Accreditation from a State or Territory Accreditation authority
- Certificate from an appropriately qualified person such as an engineer
- Certificate from a product certification body accredited by Joint Accreditation Scheme of Australia and New Zealand (JAS-ANZ)
- Report issued by a registered testing authority
- Other documentary evidence
The CodeMark Certification Scheme
The CodeMark Certification Scheme is a voluntary third-party building product certification scheme.
The Joint Accreditation System of Australia and New Zealand (JASANZ) looks over the scheme on behalf of the Commonwealth, all States and Territories.
The JASANZ website includes a register of CodeMark Certified Products which gives details of all CodeMark Certificates of Conformity issued by CodeMark certification bodies.
There is one type of evidence that can be used to verify that a product conforms and or complies with Volume Three of the NCC:
- Watermark Certificate of Conformity
The WaterMark Certification Scheme
The WaterMark Certification Scheme is a mandatory certification scheme for plumbing and drainage products to make sure they are fit for purpose and appropriately authorised for use in plumbing and drainage installations.
The ABCB manages and administers the scheme nationally. Products that have been certified and marked in accordance with the requirements of the WaterMark Certification Scheme can be found on the WaterMark Product Database on the ABCB website.
NSW planning and building laws
NSW planning and building laws regulate building activity and key practitioners and trades in the construction sector.
It’s the combined planning and building laws in NSW that require compliance and conformance with the National Construction Code as a condition of planning and building approvals.
As a consent authority, your local council issues approvals, consents or permits for planning, development and building applications in your area. Councils also enforce compliance with approvals and permits during construction.
In NSW, it is the Department of Planning, Housing and Infrastructure that administers the planning system and the Building Commission NSW that regulates the building industry.
Gas and electrical products
In addition to planning, building and consumer product safety regulation, some products and materials are regulated by specialist regulatory regimes.
Gas and electrical articles and appliances in NSW are subject to specific requirements before they are sold in Australia.
Find out about the requirements for:
Product assurance
There are a range of methods and schemes that can be used to test and prove that a building product or material is genuine and will do what it is made to do. Go to the Procurement of Construction Products Guide on the Australian Procurement and Construction Council website for a detailed list and description of each of the schemes.
In December 2017, new laws commenced in NSW to prevent the use of unsafe building products in building and construction.
The Building Products (Safety) Act 2017 gives the NSW Government powers to prohibit the use of a building product which pose a safety risk in buildings by imposing a ban on any or all of a product’s uses.
Read more on Building product safety laws.
The safety of everyday consumer products and product-related services is governed by the Australian Consumer Law (ACL). The ACL is adopted nationally through state and territory fair trading legislation. The Australian Competition and Consumer Commission (ACCC) Product Safety website has information about the national consumer product safety system and a register for Product Safety recalls in Australia, including a classification for industrial, business and building products.
The consumer product safety laws apply to consumer goods and product-related services. In simple terms:
- Consumer goods are things intended for personal, domestic or household use or consumption; or likely to be used for personal, domestic or household use or consumption.
- Product-related services are services for or relating to: installation of consumer goods; maintenance, repair or cleaning of consumer goods; assembly of consumer goods; or delivery of consumer goods.
Some building products and materials may not be covered by the ACL product safety system if they are not ordinary consumer goods.
Complaints
To make a complaint or to raise your concerns about a non-conforming building product, call 13 27 00.
You can lodge a home building complaint if your matter relates to an unresolved dispute between a home owner and licensed contractor.
Go to the building complaint information page for more information about what happens after you lodge a complaint.