Seizing process of wire rope

A guide for how to seize wire rope.

It is important to seize the end of a wire rope before it is cut. You can seize by way of:

• soft wire
• marlin twine
• fibreglass tape.

Then after cutting apply:

• suitable clamps, or
• brazing.

Particularly in the case of non-rotating ropes, seizing will prevent the inner layer moving relative to the outer layers. This is critical as the rope can become unbalanced, and can result in bird caging and diminished rope life.

Birdcaging

Below is the process for cutting wire rope.

Seize rope and place in valley track

Ensure all PPE is in place before cutting

Prepare to cut through marked area

Cut rope. Do not use excessive force

Be aware that the cut ends will still be hot