Application to supply cladding materials or systems


Complete this application to propose cladding materials and systems for use in Project Remediate. 

Key information 

  • Status: Open 

  • Combustible cladding and cladding systems on class 2 buildings are being replaced as part of Project Remediate  

  • Cladding material providers are asked to propose materials and/or a system for use in cladding remediation work under Project Remediate 

  • Only cladding materials endorsed by the Cladding Product Safety Panel (CPSP) will be used under this program  

  • The CPSP will consider the specific materials in each submission and may endorse the materials for particular uses under the program subject to the outcome of the panel’s evaluation. 

  • Each submission should relate to a single material/system. Please make a separate submission if your organisation is offering to provide more than one material or system.

Project objective

Project Remediate is a three-year program to help remove combustible cladding on high-risk class 2 apartment buildings known to  the Cladding Taskforce. 

Guidance for completing this application

Fire testing

NATA-accredited fire testing reports 

Other fire test report(s) 

  • Provide copies of any other fire testing conducted on the material or system you are submitting for consideration, for example any testing against international standards.

Other testing reports

Provide copies of any other fire testing conducted on the material or system you are submitting for consideration, for example any testing against international standards. 

Product specifications
  • Documentary evidence that states the properties and performance of the submitted materials/system.  

  • This may be a technical specification of the material/system you are submitting. 

Product data sheets
  • A summary document outlining all the key technical information of the material/system.  

  • This may contain specific instructions on the use of the product/system as well as any limitations or conditions of use. 

Installation and/or system design requirements
  • The materials and systems you are submitting need to be fit for purpose for the proposed use without any onerous maintenance measures for building occupants and owners.
  • Attach any technical manual or relevant documents that specify the installation methods as well as handling & storage requirements that would apply to the proposed use.
Warranty information

Provide all relevant information (complete terms and conditions) related to the warranty that would apply to the material or system if used under Project Remediate.

Evidence of compliance with applicable National Construction Code requirements

Cladding systems in an external wall of a building play an important role not only in relation to fire-safety but also in performing critical functions including thermal insulation, weatherproofing, acoustic performance, condensation, and resistance to structural loads including wind, as well as aesthetics.

In addition to evidence of fire testing, please provide data/information to demonstrate how the material/system meets the applicable NCC requirements in the following areas:

  • Thermal performance (or thermal rating)
  • Condensation
    (refer Part F6: Condensation Management of NCC 2019 Volume One Amendment 1)
  • Weatherproofing 
    (refer Part F1: Damp and Weatherproofing of NCC 2019 Volume One Amendment 1, especially FP1.4 for external walls)
  • Structural integrity particularly wind loading 
    (refer Part B1: Structural Provisions of NCC 2019 Volume One Amendment

This information in relation to the NCC requirements is essential to assess the overall performance of the cladding system including the cavity barrier and mechanical fixing.

After you make a submission 

You will receive a copy of your submission via email. 

Your application will be reviewed by the Global Façade Consultant appointed under Project Remediate, and the Cladding Product Safety Panel (CPSP).  

Contact us

If you have any questions about this application process, email cpsp@customerservice.nsw.gov.au.  

Your details

Fields are mandatory unless (optional) 
Organisation type
The information in this section must relate to the company or entity that would contract with building owners or a Project Remediate intermediary for the supply of the material(s).
Please provide your Australian Company Number (ACN) or Australian Business Number (ABN) that relates to your entity.

Material details

Each submission should relate to a single material/system. Please make a separate submission if your organisation is offering to provide more than one material or system.
Material type(s)

Supporting information

This section lists information or documents that may be relevant to provide with your submission.

Select the relevant checkboxes to indicate the documents you are submitting.
 

1. Fire testing reports

NATA-accredited fire testing reports
Select the relevant checkboxes if you are attaching documents.
 
Other fire test report(s)
Select the checkbox if you are attaching related documents.
 
Unlimited number of files can be uploaded to this field.
25 MB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.
25 MB limit per form.


Full fire test report(s) from an independent, NATA (National Association of Testing Authorities)-accredited laboratory.

NATA-accredited fire testing report(s)

Attach relevant documents if you are providing complete copies of any fire testing reports for the material or system, including any testing to AS 1530 series and AS 5113 by an independent NATA (National Association of Testing Authorities)-accredited laboratory.

Reports must relate to the specific material or system you are submitting for consideration.

2. Other testing report(s)

Select the checkbox if you are attaching related documents.
 
Unlimited number of files can be uploaded to this field.
25 MB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.
25 MB limit per form.
Attach any testing reports relating to other performance characteristics of the material or system you are submitting for consideration.
 

4. Installation

Select the checkbox if you are attaching related documents.

 
Unlimited number of files can be uploaded to this field.
25 MB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.
25 MB limit per form.

Installation and/or system design requirements

The materials and systems you are submitting need to be fit for purpose for the proposed use without any onerous maintenance measures for building occupants and owners. Attach any technical manual or relevant documents that specify the installation methods as well as handling & storage requirements that would apply to the proposed use.


Warranty information 

Warranty information including all relevant terms and conditions that would apply if the product was supplied to Project Remediate remediation projects
Provide all relevant information (complete terms and conditions) related to the warranty that would apply to the material or system if used under Project Remediate.
 

5. Warranty information

Select the checkbox if you are attaching related documents.

 
Unlimited number of files can be uploaded to this field.
25 MB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.
25 MB limit per form.
Select the checkbox if you are attaching related documents.
 

6. Evidence of compliance with applicable National Construction Code requirements

Select the checkbox if you are attaching related documents.
 
Unlimited number of files can be uploaded to this field.
25 MB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.
25 MB limit per form.
You will need to provide the data/information below which may be from an independent source (for example, a test facility). A NATA-accredited test laboratory is not a requirement:
  • Thermal performance (or thermal rating) 
     
  • Condensation 
    Part F6: Condensation Management of  NCC 2019 Volume One Amendment 1)
     
  • Weatherproofing 
    Part F1: Damp and Weatherproofing of NCC 2019 Volume One Amendment 1, especially FP1.4 for external walls
     
  • Structural integrity particularly wind loading 
    Part B1: Structural Provisions of NCC 2019 Volume One Amendment 1
This information in relation to the NCC requirements is essential to assess the overall performance of the cladding system including the cavity barrier and mechanical fixing.
 

7. Other supporting documentation

Any other supporting documents not captured elswehere. 
 
Select the checkbox if you are attaching other supporting documents.
 
Unlimited number of files can be uploaded to this field.
25 MB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.
25 MB limit per form.

Disclaimer

By making this submission you are providing product related information for the purpose of the CPSP’s review and consideration only. The particular use of any cladding material and/or system in Project Remediate is subject to robust evaluation and endorsement by the CPSP.
 
Top of page