Skip to main content

All–terrain platform

Find out about conditional registration, acceptable uses and equipment requirements for all-terrain platforms.

On this page

What is an all-terrain platform?

An all-terrain platform is used to access high locations while on uneven ground.

You need a Car (Class C) licence to drive an all-terrain platform.

Conditional registration for all-terrain platforms

All terrain platform

All-terrain platforms need to be conditionally registered to be used on public roads and road-related areas.

Conditional registration gives you limited road access to perform specific functions.

You cannot get conditional registration if a vehicle that complies with the construction and equipment requirements of the Australian Design Rules can be used to perform the same function.

See information about vehicle standards to see what standards apply.

Find out how to apply for conditional registration for an all-terrain platform.

Vehicle requirements

All-terrain platforms must meet all the following vehicle conditions to apply for conditional registration:

  • Vehicles must travel with the boom lowered in accordance with the manufacture’s specification and the boom must be in line with the direction of travel.
  • Documented risk assessment must be carried out by the employer or their delegate.

Oversize vehicle operators

Vehicles that go beyond the dimension and weight limits must comply with the conditions of the relevant access notice or permit. To find out the conditions for:

  • NSW permits – contact Special Permits Unit on 1300 656 371
  • interstate permits – contact National Heavy Vehicle Regulator on 1300 696 487.

Conditions of use

The following minimum conditions apply to conditional registration.

Condition Code
Daylight / floodlit worksite use only
Note: Not required if vehicle has headlights
TD1
Flashing amber beacon required and used when vehicle moving SL1
Vehicle to be floated from site to site (except that it can operate in areas designated in LO5) LO99
Use only within a defined area road construction zone where a traffic control plan applies LO5
Audible warning device must sound at all times when vehicle moving Free text
Not to be operated on a sealed road if carrying any load Free text
Restricted to a maximum speed of 6 km/h Free text
Overmass permit (route specific)
Note: Only applies when advised by National Heavy Vehicle Regulator
OM3
Oversize permit (general)
Note: Only applies when advised by National Heavy Vehicle Regulator
OS1
Oversize permit (route specific)
Note: Only applies when advised by National Heavy Vehicle Regulator
OS2
Steering failure warning device, sign required
Note: Only applies to vehicles with hydraulic steering. The maximum speed 6 km/h advisory sign is required where practicable.
SL99

Equipment requirements

To receive conditional registration you must ensure that the following equipment requirements are met.

Equipment Daylight/floodlit use
Amber rotating beacon Yes
Brake and turn lights Yes
Headlights, tail and number plate lights No
Rear reflectors or reflective tape Yes
Side reflective tape No
Rear vision mirror(s) Yes
Horn Yes

Lighting

All lighting must be fitted as near as possible to the position specified in Schedule 2 of:

Transport for NSW office use

Code Type Code
Vehicle shape FLP or LLP
Compulsory Third Party insurance class
Note: If FARM or UFRM, a Declaration of Eligibility for a Registration Concession (PDF, 292.37 KB) must be presented with the  Application for Conditional Registration (PDF, 372.68 KB) .

Conditional registration - PLNT / FARM

Unregistered Vehicle Permit - UPLN / UFRM

Registration usage PLNT
Top of page